P990i successfully unlock

P990i successfully unlock

here is the logs:

v0.91380093/UNI
Card serial:rising-gsm
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
detected MASTER on COM18, SLAVE on COM19
Open COM port OK
ChipID:7100,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35959300749935 CERT:RED
LDR:060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
Flash ID check:2010
Flash props sent ok
CSloader version:
060505 1238 ALU1_CXC1327363_1_SEMC_CS_LOADER_1_P1A
Executing CSCA-based unlock.
loader startup: executed
loader GDFS startup: executed
Connecting to server
seed is:0004791C
after step3...
3G product loader unlocked ok
loader unlock: executed
Backup security data...
Erasing locks...

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

TRYING TO RESET PDA PHONE...
SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM16
Open COM port OK
phone ready to proceed.
Connecting to server
seed is:003DD5CD
Phone succefully unlocked. USERCODE reset to "0000"
Elapsed:126 secs.




Just for another references

Here is the procedure:

Quote :

instructions how to work with new semc smartphones.

first, basics. there is two PDA security type - NEW and OLD. OLD security phones can be worked out without credits.
NEW security phones requires credits to unlock (and to COMPLETELY flash phone).

Identify button will show security type - it will write "NEW SECURITY detected" with NEW security phones.


if you want to UNLOCK NEW SECURITY phone -

if is better to install PDA phone drivers before operations.
for that you need to download phones.rar from support.

turn on phone. in "connections manager->usb" select "normal mode".
now, attach cable. windows will ask you for drivers. point it to corresponding folder of extracted phones.rar.
you must have "semc xxx usb modem" and "semc xxx application port" if drivers correctly installed.
now, turn phone off and detach it. phone mode drivers installation completed.

check "use server" and enter your login/password. PDA unlock requires 5 credits.

now, you need install drivers for flashing.
for that, poweron smartphone in fw update mode.

- for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
- for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.

now, when all preparations finished - press unlock button and insert cable to phone,while holding appropriate key on phone.

if you want to UNLOCK OLD SECURITY phone -


UNCHECK "use server".
BE SURE you have latest REST files.

now, you need install drivers for flashing.
for that, poweron smartphone in fw update mode.

- for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
- for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.

now, when all preparations finished - press unlock button and insert cable to phone,while holding appropriate key on phone.


if you want to FLASH phone -

first, you need download needed firmware package.
add it to firmware area on smartphone tab.

if you have NEW SECURITY phone then
check "use server" and enter your login/password, else UNCHECK "use server".

now, you need install drivers for flashing.

for that, poweron smartphone in fw update mode.

- for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
- for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.

now, you can press desired operation.

identify - to readout phone information (and userlock)
flash - to flash package.

!note. there is a checkbox named "process PDA update files" if you UNCHECK it - NO CREDIT WILL BE DEDUCTED from your account, but CDA will be UNCHANGED in phone. you got me ? ( got, lol ) yes, that is FREE FLASHING.

!note. if you flashing multiple smartphones, BE SURE THAT DRIVERS ARE INSTALLED BEFORE starting desired operation.

read gdfs - read gdfs for different things.
write gdfs - write gdfs back.

!note. if you write gdfs from other phone, say bye-bye to yours expensive pda. (that is only correct for NEW security)

good info bro............................................................post as many as you can.......................